Looks like it's missing - there's only an on/off setting and only the ability to activate it based on RPM and time after the first stage was activated.
In my case, I would like to activate it based on whether a switch was toggled and if the car is in 4th gear or higher (so I will be using a loop output). We are already running a smaller solenoid on gears 1-3, and we want to add more on gears 4-6.
Is it possible add this?
Selectable input for 2nd stage of nitrous
Moderators: jsmcortina, muythaibxr
Selectable input for 2nd stage of nitrous
The man behind MS Labs
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost