Feature Request: Bank-Bank Staged Nitrous

[LT401Vette]

Currently just moving my car from an MS3-Pro to an MS3-Pro Ultimate

I have direct port Nitrous that I fire in 2 stages.
Stage 1 is left bank
Stage 2 is right bank.
It is currently a wet system

I would like this to work dry where I can add fuel only to the left bank on stage 1, then both banks when stage 2 is activated.

As a bonus, I would like to add a 3rd stage where all cyl are hit again.

or, better yet, lay it out as 4 stages:
Stage 1: Left Bank
Stage 2: both banks
Stage 3 Both banks + 2nd left
Stage 4: Both banks + 2nd both banks.

The key is that I need to be able to control what cylinders are getting extra fuel per stage.

[jsmcortina]

Is this a common configuration? I've always applied each stage to all cylinders.

James

[LT401Vette]

Yes, in the big engine drag racing world it is quite common.

Currently I am running each bank as a wet stage. But even then I would like to be able to fine tune fueling with the injectors instead of jet changes only.

Also going dry frees up the 2nd jet in each nozzle for another stage of Nitrous.