Did anyone get chance to test the code I sent?
James
Evo 9 VVT support?
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Evo 9 VVT support?
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 377
- Joined: Wed Apr 13, 2011 7:38 pm
- Location: Puerto Ordaz - Venezuela
- Contact:
Re: Evo 9 VVT support?
hello, I was testing and no luck
pt4 input with 5v pull up or not did not show vvt2 angle
datalog input, with 12v pull up or not, shows different angles but they are not real because the pwm goes to 100% can hear the overlap but doesn't show an actual angle
pt4 input with 5v pull up or not did not show vvt2 angle
datalog input, with 12v pull up or not, shows different angles but they are not real because the pwm goes to 100% can hear the overlap but doesn't show an actual angle
- Attachments
-
- evo vvt.msl
- (265.64 KiB) Downloaded 26 times
-
- vvt evo comp.csv
- (42.83 KiB) Downloaded 28 times
-
- evo vvt.msq
- (286.54 KiB) Downloaded 22 times
Megasquirted engines: 4g63, k24a2, b16-b18, duratec, ecotec, fiat 8v-16v, modular 4.6 32v, 1fz-fe, fiat 5cil 20v, Opel corsa, G54B, VW AG, 2ZZ-GE.
https://www.facebook.com/Bartonefi
instagram: @bartonefi
https://www.facebook.com/Bartonefi
instagram: @bartonefi
Re: Evo 9 VVT support?
Interested in this for the next phase of my build.
Any updates?
Any updates?
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Evo 9 VVT support?
I'm seeing VVT angles in the log you posted, but the VVT settings are incomplete.Barton wrote:hello, I was testing and no luck
What was happening in test mode?
What does the second cam trigger look like? I'm not sure if this data has been given to me, so perhaps the decoder isn't going to work ?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".