Evo 9 VVT support?

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Re: Evo 9 VVT support?

Postby jsmcortina » Sun Nov 12, 2017 9:39 am

Did anyone get chance to test the code I sent?

I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
Site Admin
Posts: 33984
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK

Re: Evo 9 VVT support?

Postby Barton » Thu Dec 14, 2017 12:55 pm

hello, I was testing and no luck

pt4 input with 5v pull up or not did not show vvt2 angle

datalog input, with 12v pull up or not, shows different angles but they are not real because the pwm goes to 100% can hear the overlap but doesn't show an actual angle
evo vvt.msl
(265.64 KiB) Not downloaded yet
vvt evo comp.csv
(42.83 KiB) Not downloaded yet
evo vvt.msq
(286.54 KiB) Not downloaded yet
Megasquirted engines: 4g63, k24a2, b16-b18, duratec, ecotec, fiat 8v-16v, modular 4.6 32v, 1fz-fe, fiat 5cil 20v, Opel corsa, G54B, VW AG, 2ZZ-GE.
instagram: @bartonefi
Master MS/Extra'er
Posts: 375
Joined: Wed Apr 13, 2011 7:38 pm
Location: Puerto Ordaz - Venezuela


Return to MS3 Development

Who is online

Users browsing this forum: No registered users and 2 guests