I was wondering is it posible to make the logger log all cam configured for vvt to help diagnose and configure correctly the vvt system.
Juan
Req to make log for all wired cam inputs
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 612
- Joined: Fri Feb 25, 2011 4:28 pm
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Req to make log for all wired cam inputs
The "Engine Logger" allows you to do this. You need the registered version of TunerStudio to gain access to it though.
PORTT0, T2, T4, T5, T6 are the crank and cam inputs.
James
PORTT0, T2, T4, T5, T6 are the crank and cam inputs.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 612
- Joined: Fri Feb 25, 2011 4:28 pm
Re: Req to make log for all wired cam inputs
got it Thanks.