CAS RB26 R33 R34 different
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
CAS RB26 R33 R34 different
Hi,
in recent months, I'm working with Skyline R33 R34 engine RB26.
I noticed that r33 r34 have a different cas. First difference is order wires. The order 1-2-3-4 is inverted 4-3-2-1 in the cas. This is minimal problem.
Second difference is the signal. R34 is opposite R33 and the falling rising setting is insufficient. The 'only way is to reverse the hardware level signal.
I realized that the problem for the code is LowRes signal. Now I inverted it with optoisolator, no problem,but I think this may confuse many people.
I tried flip rotate, but I have not seen any effect.
My idea is: Is possible insert "FLIP ROTATE" for low res?
Regards Cristian
in recent months, I'm working with Skyline R33 R34 engine RB26.
I noticed that r33 r34 have a different cas. First difference is order wires. The order 1-2-3-4 is inverted 4-3-2-1 in the cas. This is minimal problem.
Second difference is the signal. R34 is opposite R33 and the falling rising setting is insufficient. The 'only way is to reverse the hardware level signal.
I realized that the problem for the code is LowRes signal. Now I inverted it with optoisolator, no problem,but I think this may confuse many people.
I tried flip rotate, but I have not seen any effect.
My idea is: Is possible insert "FLIP ROTATE" for low res?
Regards Cristian
-
- Site Admin
- Posts: 39613
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: CAS RB26 R33 R34 different
The input capture setting should do exactly what you are doing in hardware.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
Re: CAS RB26 R33 R34 different
Hi James, thanks for replay.
Flip rotate inverting hires, but is indifferent for sync. The problem is lowres
Falling-rising, reverses the direction of rotation (so I understand)
I attach composite
Flip rotate inverting hires, but is indifferent for sync. The problem is lowres
Falling-rising, reverses the direction of rotation (so I understand)
I attach composite
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
Re: CAS RB26 R33 R34 different
This is, R33 with hardware lowres inverting
-
- Site Admin
- Posts: 39613
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: CAS RB26 R33 R34 different
No it doesn't. It changes the input capture polarity.AbatelliCristian wrote:Falling-rising, reverses the direction of rotation (so I understand)
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
Re: CAS RB26 R33 R34 different
I James,
in the second and third photo I have inverted Falling-rising, but in the composite I see reverses the direction of rotation . I'm doing it wrong?
in the second and third photo I have inverted Falling-rising, but in the composite I see reverses the direction of rotation . I'm doing it wrong?
-
- Site Admin
- Posts: 39613
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: CAS RB26 R33 R34 different
I don't see how it could reverse the direction.AbatelliCristian wrote:I James,
in the second and third photo I have inverted Falling-rising, but in the composite I see reverses the direction of rotation . I'm doing it wrong?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39613
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: CAS RB26 R33 R34 different
If you have a spare CAS, please send it to me and I'll try it out.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
Re: CAS RB26 R33 R34 different
Sorry James, I have only this. I can do some testing for you?