ms3x question

[chrismith]

hi have the ms3x megasquirt got a problem it is configured for a hall cam sensor can i change this to a vr type sensor by altering the jumpers on the mother board

[ae86drftr]

There is a VERY detailed description in the Megamanual to help you complete whatever it is you wish with your Megasquirt. You can find it here http://www.msextra.com/doc/pdf/html/MS3 ... e-1.4.html or here http://www.msextra.com/doc/pdf/html/MS3 ... e-1.4.html depending on the board in question.

[chrismith]

thanks for that i have managed to source an answer on the ms3x board the jumper jp7 needs to be removed and then in the loom connector pin 32 is signal from cam sensor and ground and sheild to pin 2