MS3 pre-1.5.1 beta 4 firmware released

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

ashford
Super MS/Extra'er
Posts: 1603
Joined: Sun Apr 27, 2008 4:29 pm

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by ashford »

has the "flex multiplier %" rollover past 152% to 100 been addressed yet?
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by jsmcortina »

ashford wrote:has the "flex multiplier %" rollover past 152% to 100 been addressed yet?
I think so, but could you remind me of the topic where MSQ/MSL are posted and I'll double check.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
User avatar
puntogt4
Helpful MS/Extra'er
Posts: 79
Joined: Tue Mar 28, 2006 12:10 pm
Location: arezzo,italy
Contact:

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by puntogt4 »

puntogt4 wrote:
puntogt4 wrote:I have problem for VSS1 setup,
on my car is connect to PT4 and i don't read any speed,
but if I set shaft speed to PT4 and high speed setup like on my MSQ I'm able to read the rpm's
now I cant go back to my old version because i lost the firmware -_-
Nobody have same problem to rat the speed from PT4 input?
on attach msq and relative log
Today I load a old beta, 14.2, and vss come back again, I think the problem is on PT4 input, because by choose it for vss you can't set high option "speed input", like shaft speed, if there you don't set "high speed" I don't see any speed on tuner studio

Inviato dal mio HUAWEI NMO-L31 utilizzando Tapatalk
Problem find, maybe can help someone,
problem was on tunerstudio, ofter reflash many time the cpu whit varius beta and relaise
my project on tuner studio give error, make a new project an vss start to work normally
is very strange because every time i loat a any firmware older than 1.4 vss work fine
I also try on laptop before I can't see vss making a new project vss are working again!
Fast Only Rolling Down
ashford
Super MS/Extra'er
Posts: 1603
Joined: Sun Apr 27, 2008 4:29 pm

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by ashford »

jsmcortina wrote:
ashford wrote:has the "flex multiplier %" rollover past 152% to 100 been addressed yet?
I think so, but could you remind me of the topic where MSQ/MSL are posted and I'll double check.

James

sorry i missed this. here is the older post http://www.msextra.com/forums/viewtopic ... 20#p500303
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by jsmcortina »

Good info on the flex. I will investigate.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by jsmcortina »

Flex changes now committed.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Manu
Master MS/Extra'er
Posts: 723
Joined: Mon Feb 15, 2010 4:57 am
Location: Alès - France
Contact:

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by Manu »

James,

Can you also add pt4 or other fast pwn input to flex as we discussed before ?

Thanks,
Manu
I can supply, repair or upgrade Megasquirts in FRANCE.

Image
https://www.megasquirt.fr
LSXCutty
Experienced MS/Extra'er
Posts: 185
Joined: Tue May 10, 2016 5:00 am

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by LSXCutty »

So I'm understanding this correctly. Closed loop Dome Control will follow the Bias table until your delta and then it will do what it has to do to compensate?
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by jsmcortina »

LSXCutty wrote:So I'm understanding this correctly. Closed loop Dome Control will follow the Bias table until your delta and then it will do what it has to do to compensate?
Yes.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
jsiedlicki
Master MS/Extra'er
Posts: 687
Joined: Sun Jun 23, 2013 3:52 pm

Re: MS3 pre-1.5.1 beta 4 firmware released

Post by jsiedlicki »

James, This post got bounced around a bit before it was moved to MS3 Development. Apparently its firmware related and not TunerStudio as I had initially thought. Can you confirm if it is a firmware issue?

VVT settings not highlighted in feature list
MS3-Pro 1st Gen | Honda K24 Supercharged
MS3/MS3X | SB Ford 347 stroker
Post Reply