MS3 pre-1.5.1 beta 4 firmware released
Moderators: jsmcortina, muythaibxr
Re: MS3 pre-1.5.1 beta 4 firmware released
has the "flex multiplier %" rollover past 152% to 100 been addressed yet?
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 pre-1.5.1 beta 4 firmware released
I think so, but could you remind me of the topic where MSQ/MSL are posted and I'll double check.ashford wrote:has the "flex multiplier %" rollover past 152% to 100 been addressed yet?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
- puntogt4
- Helpful MS/Extra'er
- Posts: 79
- Joined: Tue Mar 28, 2006 12:10 pm
- Location: arezzo,italy
- Contact:
Re: MS3 pre-1.5.1 beta 4 firmware released
Problem find, maybe can help someone,puntogt4 wrote:Today I load a old beta, 14.2, and vss come back again, I think the problem is on PT4 input, because by choose it for vss you can't set high option "speed input", like shaft speed, if there you don't set "high speed" I don't see any speed on tuner studiopuntogt4 wrote:I have problem for VSS1 setup,
on my car is connect to PT4 and i don't read any speed,
but if I set shaft speed to PT4 and high speed setup like on my MSQ I'm able to read the rpm's
now I cant go back to my old version because i lost the firmware -_-
Nobody have same problem to rat the speed from PT4 input?
on attach msq and relative log
Inviato dal mio HUAWEI NMO-L31 utilizzando Tapatalk
problem was on tunerstudio, ofter reflash many time the cpu whit varius beta and relaise
my project on tuner studio give error, make a new project an vss start to work normally
is very strange because every time i loat a any firmware older than 1.4 vss work fine
I also try on laptop before I can't see vss making a new project vss are working again!
Fast Only Rolling Down
Re: MS3 pre-1.5.1 beta 4 firmware released
jsmcortina wrote:I think so, but could you remind me of the topic where MSQ/MSL are posted and I'll double check.ashford wrote:has the "flex multiplier %" rollover past 152% to 100 been addressed yet?
James
sorry i missed this. here is the older post http://www.msextra.com/forums/viewtopic ... 20#p500303
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 pre-1.5.1 beta 4 firmware released
Good info on the flex. I will investigate.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 pre-1.5.1 beta 4 firmware released
Flex changes now committed.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MS3 pre-1.5.1 beta 4 firmware released
James,
Can you also add pt4 or other fast pwn input to flex as we discussed before ?
Thanks,
Manu
Can you also add pt4 or other fast pwn input to flex as we discussed before ?
Thanks,
Manu
Re: MS3 pre-1.5.1 beta 4 firmware released
So I'm understanding this correctly. Closed loop Dome Control will follow the Bias table until your delta and then it will do what it has to do to compensate?
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 pre-1.5.1 beta 4 firmware released
Yes.LSXCutty wrote:So I'm understanding this correctly. Closed loop Dome Control will follow the Bias table until your delta and then it will do what it has to do to compensate?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 687
- Joined: Sun Jun 23, 2013 3:52 pm
Re: MS3 pre-1.5.1 beta 4 firmware released
James, This post got bounced around a bit before it was moved to MS3 Development. Apparently its firmware related and not TunerStudio as I had initially thought. Can you confirm if it is a firmware issue?
VVT settings not highlighted in feature list
VVT settings not highlighted in feature list
MS3-Pro 1st Gen | Honda K24 Supercharged
MS3/MS3X | SB Ford 347 stroker
MS3/MS3X | SB Ford 347 stroker