CEL 243?

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Post Reply
Bmettie
Helpful MS/Extra'er
Posts: 60
Joined: Sun Jan 11, 2015 6:00 pm

CEL 243?

Post by Bmettie »

So i was flipping through logs from a drive the other day and I noticed this. For about 13 seconds I had CEL 243, inconsistent lost sync reasons 14 and 243, inconsistent PWM Idle Duty of -1209 and inconsistent stepper idle position of-3085. I don't recall any drivability issues when I was out. Now this was off the SD card, and I'm running beta 4. I was thinking this was SD card write related but all other values are smooth, I see there are SD card updates in beta 5. I did a quick search and i couldn't find anything related to CEL 243.

Thoughts?
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: CEL 243?

Post by jsmcortina »

That has to be bogus data. Not sure why, but it doesn't make sense. The Sync Loss count goes from 0 to 243 and then back to 0 also, that's not possible.

Also, if that really is log number 3113 on your card, I'd suggest you erase it. For best SDcard operation, keep the card as empty as possible.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply