loop bitfield in broadcast?
Moderators: jsmcortina, muythaibxr
-
thokes82
- Helpful MS/Extra'er
- Posts: 102
- Joined: Mon Apr 27, 2009 5:02 am
- Location: Munster, Germany
- Contact:
loop bitfield in broadcast?
Question is in the title: As far as I saw, the loop bitfield does not get broadcasted on CAN. I would like to setup 6 EGTs and use only one byte to tell which cylinder has over temperature in my dash. I could do the evaluation of actual values in the Dash but I do not have enough free channels.
-
thokes82
- Helpful MS/Extra'er
- Posts: 102
- Joined: Mon Apr 27, 2009 5:02 am
- Location: Munster, Germany
- Contact:
Re: loop bitfield in broadcast?
Can I use CANOUT bitfield instead if it is not used?