Traction Control Fuel Cut

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Post Reply
aidandj
Experienced MS/Extra'er
Posts: 255
Joined: Fri Sep 26, 2014 1:38 am

Traction Control Fuel Cut

Post by aidandj »

After talking to a few friends who have racelogic traction control, it seems that the fuel cut does a really good job of cutting power, without slowing down airflow. I have played with spark retard, and cut, but that is more violent, and in some cases does not cut enough power.

With sequential injection would it be possible to allow a pattern of fuel cut that would kill injector signals. Maybe even a configurable patter.

https://racelogic.support/05Traction_co ... p_Software

Some more info there.

There are 3 sequences. Each assigned a slip %. As wheel slip increases it will apply each sequence. Starts by cutting a few cylinders at 5%, more at 10%, even more at 15%. And then after a certain amount of time it applies the integral sequence. And totally shuts down slip.

Image

This setup seems to work really well on a variety of cars.

Any possibility of trying it out?
Post Reply