feature request - PWM output %duty cycle over-ride input

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

feature request - PWM output %duty cycle over-ride input

Postby ca434sbc4 » Sun Dec 10, 2017 11:34 am

Usage PWM output where an external requirement demands an adder value to the table (open loop) or current closed loop PWM output.

Some potential applications..

- boost override - need that little extra to win the race..
- NO2 over ride - for modulated NO2 systems
- PWM fan control - to increase fan speed when the A/C high pressure gas switch turns on.

Monitor a logic input - if active add the preset %duty to the active value - if end value > 100% - run 100%DC.

This one should be not to difficult to implement.

Experienced MS/Extra'er
Posts: 358
Joined: Sun May 02, 2004 8:39 am
Location: Calgary Alberta Canada

Return to MS3 Development

Who is online

Users browsing this forum: No registered users and 1 guest