Usage PWM output where an external requirement demands an adder value to the table (open loop) or current closed loop PWM output.
Some potential applications..
- boost override - need that little extra to win the race..
- NO2 over ride - for modulated NO2 systems
- PWM fan control - to increase fan speed when the A/C high pressure gas switch turns on.
Monitor a logic input - if active add the preset %duty to the active value - if end value > 100% - run 100%DC.
This one should be not to difficult to implement.
Thanks.
feature request - PWM output %duty cycle over-ride input
Moderators: jsmcortina, muythaibxr