can egt 8 channel box

motionper · Post by **motionper** » Thu Aug 25, 2016 6:50 pm

can i use this box to record two o2 sensors and two egt sensors at the same time on my ms3

Matt Cramer · Post by **Matt Cramer** » Fri Aug 26, 2016 6:13 am

Yes, although the O2 sensors will need to be using Innovate controllers if you are running them through the CAN-EGT.

TheSilverBuick · Post by **TheSilverBuick** » Fri Aug 26, 2016 7:08 am

What is the serial patch cable for the LC-1? Does it come in the box with the LC-1 or is it something separate?

*edit* I found the patch cable 3812, since I have multiple LC-1's, can I make this cable by cutting up one of the Serial cables?

Matt Cramer · Post by **Matt Cramer** » Fri Aug 26, 2016 7:26 am

I believe they're just straight through, pin to pin.

racingmini_mtl · Post by **racingmini_mtl** » Fri Aug 26, 2016 8:58 am

You can use a simple audio male-male extension cable.

Jean

motionper · Post by **motionper** » Fri Aug 26, 2016 9:22 am

Matt Cramer wrote:Yes, although the O2 sensors will need to be using Innovate controllers if you are running them through the CAN-EGT.

can you please explain the procedure for wiring them, i will be using the innovate o2 sensors with controllers

racingmini_mtl · Post by **racingmini_mtl** » Fri Aug 26, 2016 9:45 am

Which Innovate controllers do you have?

Jean

motionper · Post by **motionper** » Fri Aug 26, 2016 12:06 pm

racingmini_mtl wrote:Which Innovate controllers do you have?

Jean

LC-2

racingmini_mtl · Post by **racingmini_mtl** » Fri Aug 26, 2016 1:08 pm

This was discussed here: http://www.msextra.com/forums/viewtopic ... 89#p467689. The LC-2 manual explains how to daisy chain multiple devices using the IN and OUT connectors.

Jean

Megasquirt Support Forum (MSEXTRA)

can egt 8 channel box

can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box

Re: can egt 8 channel box