Hi All,
I need help configuring MS3 to receive GPS data over CAN.
I am not using JBperf or Race Technology.
My CAN comms are good for outgoing messages but have not been successful at setting up CAN receiving, or not sure how to map the data coming in.
Using Dash Broadcasting.
How can I verify the message is received?
What Input channel can be used for this in the Custom Channel setup?
Thanks,
Dave W.
GPS over CAN
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: GPS over CAN
There isn't support for receiving other types of GPS data over CAN.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".