2JZ GTE VVTI full sequential capability

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
3FUN
MS/Extra Newbie
Posts: 23
Joined: Mon Dec 05, 2016 6:40 am

2JZ GTE VVTI full sequential capability

Post by 3FUN »

Hello!
I have a project with a 2JZ GTE VVTI, and i wondered if i can run this engine in full sequential mode (stock is wasted spark and semisequential or batch fire).
I know that the cam sensor is 3 pulses/rev...so i am skeptical about full sequential capability.
Had somenone some experience with this engine in full sequential
ECU is MS3 with MS3x.
Thanks
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: 2JZ GTE VVTI full sequential capability

Post by Matt Cramer »

Yes. There's a native full sequential 2JZ-VVTi decoder in the MS3 firmware.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
3FUN
MS/Extra Newbie
Posts: 23
Joined: Mon Dec 05, 2016 6:40 am

Re: 2JZ GTE VVTI full sequential capability

Post by 3FUN »

So...wiring crank sensor, and 3 theet cam sensor ...i will have full sequential capability over injection and spark.
That's good news.
Thanks
Suprazz
Master MS/Extra'er
Posts: 499
Joined: Mon Jan 22, 2007 7:58 pm
Contact:

Re: 2JZ GTE VVTI full sequential capability

Post by Suprazz »

yes its possible and not a problem. We did that multiple times.
Best looking and most advanced CAN-bus gauge
Toyota Supra 7MGE, 7M-GTE and 1JZ-GTE Plug and play ECUs: http://www.perfecttuning.net
Serial to Bluetooth or Serial to WiFi
DIYAutotune Canadian, EFI Source and ECUMaster reseller!
3FUN
MS/Extra Newbie
Posts: 23
Joined: Mon Dec 05, 2016 6:40 am

Re: 2JZ GTE VVTI full sequential capability

Post by 3FUN »

And there is a slight chance that somebody can help me with vvti settings in MS3? ...or there is a site/link where can i find vvti setup procedure for this engine?
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: 2JZ GTE VVTI full sequential capability

Post by Matt Cramer »

3FUN wrote:And there is a slight chance that somebody can help me with vvti settings in MS3? ...or there is a site/link where can i find vvti setup procedure for this engine?
http://www.msextra.com/doc/pdf/html/Meg ... 5-112.html

http://www.msextra.com/doc/pdf/html/Meg ... 5-210.html
Matt Cramer -1966 Dodge Dart slant six running on MS3X
3FUN
MS/Extra Newbie
Posts: 23
Joined: Mon Dec 05, 2016 6:40 am

Re: 2JZ GTE VVTI full sequential capability

Post by 3FUN »

Many thanks :D
Post Reply