MS2 I/O pin - beta MS3?
Moderators: jsmcortina, muythaibxr
MS2 I/O pin - beta MS3?
The I/O pin for the MAP sensor input has died on my MS2 chip. I don't really want to be forking out for another MS2 chip when i'll be buying the MS3 as soon as possible. I have the MS1 chip at the moment to get me by, but it doesn't control my large injectors anywhere near as well.
This is really just a request to be considered for the MS3 beta units which are being released soon.
Thanks, Rick.
This is really just a request to be considered for the MS3 beta units which are being released soon.
Thanks, Rick.
-
- Super MS/Extra'er
- Posts: 1933
- Joined: Fri May 07, 2004 12:59 pm
- Location: Tacoma, WA
- Contact:
Re: MS2 I/O pin - beta MS3?
Sounds like they're just going to appear for sale at DIYAutotune one day.. Just going to be a case of being in the right place at the right time when they show up.. ;) (I hope they at least limit it to 1 per customer)..
Brian
'84 Dodge Rampage
'84 Dodge Rampage
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
Re: MS2 I/O pin - beta MS3?
Even James and I are not sure how the next 20 beta units are going to be sold.
Ken
Ken
Megasquirt is not for use on pollution controlled vehicles. Any advice I give is for off road use only.
Re: MS2 I/O pin - beta MS3?
I think the best description of how they will be sold is "very very quickly"!
Eric Law
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking
Be alert! America needs more lerts.
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking
Be alert! America needs more lerts.
-
- Super MS/Extra'er
- Posts: 1933
- Joined: Fri May 07, 2004 12:59 pm
- Location: Tacoma, WA
- Contact:
Re: MS2 I/O pin - beta MS3?
20? heh, I thought it was 100.. heh.. Really, I'm more interested in seeing the MS3x boards get out to the beta testers so that this thing can get certified for production. ;)
Brian
'84 Dodge Rampage
'84 Dodge Rampage
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
Re: MS2 I/O pin - beta MS3?
We are interested in that as well. Last we heard they were being built.
We were also planning on selling 20 units as beta units. That said, both the hardware and firmware have been solid so far.
Ken
We were also planning on selling 20 units as beta units. That said, both the hardware and firmware have been solid so far.
Ken
Megasquirt is not for use on pollution controlled vehicles. Any advice I give is for off road use only.
Re: MS2 I/O pin - beta MS3?
Looks like i'm going to have to borrow an MS2 daughterboard unless something is going to become available in the next week or so.
Rick.
Rick.
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS2 I/O pin - beta MS3?
Going with the MS2 is the sure bet for the moment, until MS3 is in volume sales.
James
PS, Rick, are you in the UK? I have an MS2 available.
James
PS, Rick, are you in the UK? I have an MS2 available.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 1933
- Joined: Fri May 07, 2004 12:59 pm
- Location: Tacoma, WA
- Contact:
Re: MS2 I/O pin - beta MS3?
I would imagine, you could redirect the normal MAP ADC to something else (secondary MAP ADC) with a few minutes spent in the code. Quick recompile, and you have a custom code to work around your particular MS2's issue.. That's what I'd try to do, before buying a new MS2 chip.Rickrst wrote:The I/O pin for the MAP sensor input has died on my MS2 chip.
Brian
'84 Dodge Rampage
'84 Dodge Rampage
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS2 I/O pin - beta MS3?
Una is correct and that is one workaround.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MS2 I/O pin - beta MS3?
James, didn't see your post until i'd ordered one from Phil R, it came today which is brilliant.
I did consider reassigning the MAP input but with the boards and reg getting so hot things were probably not going to last.
New daughterboard in, and everything is good again. No idea how it failed.
Rick
I did consider reassigning the MAP input but with the boards and reg getting so hot things were probably not going to last.
New daughterboard in, and everything is good again. No idea how it failed.
Rick