MS3 - progress monitor
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
MS3 - progress monitor
All MS3 owners, please 'vote' here to indicate how you are getting on. You should be able to change your 'vote' as you move forwards.
We want MS3 to be a success and your feedback on the good (or bad) is most needed. If you think there should be more poll choices, just ask.
James
We want MS3 to be a success and your feedback on the good (or bad) is most needed. If you think there should be more poll choices, just ask.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Experienced MS/Extra'er
- Posts: 230
- Joined: Thu Oct 07, 2004 4:08 pm
- Location: Rockford, MI, USA
Re: MS3 - progress monitor
I voted "not done anything yet" because "waiting for other parts" wasn't a choice.
Re: MS3 - progress monitor
i just got my wideband replaced today can start tuning now other than by ear
-
- Site Admin
- Posts: 533
- Joined: Tue Dec 28, 2004 11:33 pm
- Location: Grove City, OH - USA
- Contact:
Re: MS3 - progress monitor
Up and running for the most part. Just some weirdness.
1997 Turbo Saturn
MS3 v0.22
TunerStudio v[insert_current_version_here]
MS3 v0.22
TunerStudio v[insert_current_version_here]
-
- Super MS/Extra'er
- Posts: 1933
- Joined: Fri May 07, 2004 12:59 pm
- Location: Tacoma, WA
- Contact:
Re: MS3 - progress monitor
Runs so well, it seems like a have a different motor under the hood. It's like going from a motor that was clearly a science experiment, to a motor that feels like it's as smooth as any OEM ECM I've ever driven. Next weekend I re-install the MS2 science experiment and see if I can figure out why it doesn't run this well.
Brian
'84 Dodge Rampage
'84 Dodge Rampage
Re: MS3 - progress monitor
Apparently, mine is sitting at UK customs......but ParcelForce have given me an internal tracking number that their system does not recognise....!?
4AGE "bench testing rig".
MR2 Roadster with 1MZFE V6 fitted: soon to get the MS3 treatment...!
.....followed by seq COP upgrade!
MR2 Roadster with 1MZFE V6 fitted: soon to get the MS3 treatment...!
.....followed by seq COP upgrade!
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 - progress monitor
Added that option...but didn't realise it would wipe out the results!! Curses. Let's start again.Eagle7 wrote:I voted "not done anything yet" because "waiting for other parts" wasn't a choice.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MS3 - progress monitor
It's running and work as intended for me. Satisfied with it. Furthermore, I managed to get third place
with MS3 in the recent local race.
with MS3 in the recent local race.
(4G63T - MSIIextra) (4G13 - MS3-beta testing)
-
- Experienced MS/Extra'er
- Posts: 301
- Joined: Fri Aug 01, 2008 2:25 pm
Re: MS3 - progress monitor
wheres the "waiting not so patiently for ms3x" option? ;)
really though, i dont drive my car alot but i did use ms3 at my last autox event and it did great!
really though, i dont drive my car alot but i did use ms3 at my last autox event and it did great!
-
- Helpful MS/Extra'er
- Posts: 144
- Joined: Thu Aug 12, 2004 7:48 pm
- Location: Little Rock, AR
- Contact:
Re: MS3 - progress monitor
Yeah, I can't really use mine until ms3x is here, but in the meantime it's serving as a nice injector tester
The years-long project: http://www.msefi.com/viewtopic.php?t=3043
Other info (stereo, interior, etc):
http://www.sounddomain.com/ride/2324498
Other info (stereo, interior, etc):
http://www.sounddomain.com/ride/2324498
Re: MS3 - progress monitor
I chose "waiting for other parts" as I'm building it and will need a few more new circuits to be built as well.
EDIT: latest update is I have completed assembly of the MS3 & bench testing. Still waiting for hall sensor for my car though
EDIT: latest update is I have completed assembly of the MS3 & bench testing. Still waiting for hall sensor for my car though
Last edited by hobieboy on Sat Apr 03, 2010 8:32 am, edited 1 time in total.
-
- Super MS/Extra'er
- Posts: 1021
- Joined: Sun Jun 27, 2004 12:04 pm
- Location: Long Beach, CA - USA
Re: MS3 - progress monitor
It runs for me, but I need to figure out PID tuning so I can get my VE table dialed in. I am also looking to get EGT sensing going very soon so that's on the horizon, but also puts a limit on my tuning abilities (because it's aircooled).
Re: MS3 - progress monitor
Up and running on the Toyota 2jzgte. Had to change it from the MS2 settings of 24 + 1 to 12+1 (was running crank input as cam sensor, so 24 base teeth on ms2).
MS3 running all 6 coils using the old MS2 spark output pins and the two main injector channels on the V3 PCB. I am dieing to get my hands on the additional injector driver board as MANY MANY high HP 2j/1j guys are watching this build peeing in their pants they paid so much for their precious AEM v2 or ProEFI
James/Ken....if there is something you need tested let me know (I'll get that MS3 log to you soon for the Nissan SR20DET CAS on ms3 as well)
MS3 running all 6 coils using the old MS2 spark output pins and the two main injector channels on the V3 PCB. I am dieing to get my hands on the additional injector driver board as MANY MANY high HP 2j/1j guys are watching this build peeing in their pants they paid so much for their precious AEM v2 or ProEFI
James/Ken....if there is something you need tested let me know (I'll get that MS3 log to you soon for the Nissan SR20DET CAS on ms3 as well)
Re: MS3 - progress monitor
I voted running and does what I want, but it really will not be finished until MS3x is available (and I can get rid of my spaghetti mess of jumper wires and hot glue).
86 Rx-7, swapped to 2.3 ford turbo (BW EFR 6758), ms3/ms3x sequential fuel /waste spark, ls2 coils
88 Tbird 2.3t, Microsquirt Module (PIMP), TFI ignition
88 Tbird 2.3t, Microsquirt Module (PIMP), TFI ignition
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 - progress monitor
Hopefully the updated MS3X samples will ready for initial "internal" testing soon.
We still need the other fifty MS3 owners to vote!
James
We still need the other fifty MS3 owners to vote!
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MS3 - progress monitor
I voted James, but if you didn't intend for Beta testers to vote, maybe I can retract my vote?
Also, I was looking for a "I made so much power with it that I already blew up my motor" option, but it wasn't there. . .
MS3 really is awesome. I'm glad Una and others are having the success with it that I've enjoyed.
Thanks James and Ken! ! !
Thad
Also, I was looking for a "I made so much power with it that I already blew up my motor" option, but it wasn't there. . .
MS3 really is awesome. I'm glad Una and others are having the success with it that I've enjoyed.
Thanks James and Ken! ! !
Thad
--'98 Dodge Neon ACR Turbo - MS3 beta test car - Sold
--'97 BMW 540i/6spd - Single Front/Top Mount Turbo 550+ HP - MS3+MS3X V3.0 - Sold but ripping in Vegas
--'97 BMW 328i 5.3 L33/TH400 Swapped drift car - MS3+MS3X V3.0 Full Sequential - Turbos And Radiator In the Trunk 9.6@144 on a 1.55 60ft
--'97 BMW 540i/6spd - Single Front/Top Mount Turbo 550+ HP - MS3+MS3X V3.0 - Sold but ripping in Vegas
--'97 BMW 328i 5.3 L33/TH400 Swapped drift car - MS3+MS3X V3.0 Full Sequential - Turbos And Radiator In the Trunk 9.6@144 on a 1.55 60ft
Re: MS3 - progress monitor
up an running and already flogging it
2270 Type 4 ACVW MS3 + MS3X + v3.57 +LS2 CNP + full sequential
Re: MS3 - progress monitor
Just received my second jbperf 4 channel board today. Was running 3.03r 4 channel on a 388 sbc.
I will be running the ms3 this weekend and will start my own thread.
I voted waiting for other parts because I only had 4 channel ignition and injection to work with.
I'd be up and running already if I had a ms3x board also. The sudden release of the MS3 caught me a little un prepared.
Looks awsome though. Made a vortec 1x cam signal mod tonight. Should be a go for saturday on the dyno.
Joe
I will be running the ms3 this weekend and will start my own thread.
I voted waiting for other parts because I only had 4 channel ignition and injection to work with.
I'd be up and running already if I had a ms3x board also. The sudden release of the MS3 caught me a little un prepared.
Looks awsome though. Made a vortec 1x cam signal mod tonight. Should be a go for saturday on the dyno.
Joe
78 Chev 4x4 MS3. Microsquit 4l80E (Toy Hauler/Beta test rig )
70 AAR Cuda -Hanger queen- 340 MS3 Seq- XV Level II
70 AAR Cuda -Hanger queen- 340 MS3 Seq- XV Level II
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 - progress monitor
You did right, we are looking to capture the status of everyone who has one.Tjabo wrote:I voted James, but if you didn't intend for Beta testers to vote, maybe I can retract my vote?
Hope you get your new engine together soon!
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 99
- Joined: Tue Sep 11, 2007 2:44 am
- Location: Ermelo, The Netherlands
Re: MS3 - progress monitor
Yes, got the car running. V8 full seq lpg inj and spark just like with my dual ms2db. Now a bit retuning and see if I can get the dual fuel working.
Jacco
68 Mustang 289 V8 megasquirt 3 MPI BiFuel fullseq. V8 LPG & Petrol Injection & Spark
91 Ford Sierra 1.6 OHC MS2
Your European Megasquirt source
http://www.jfetech.nl
68 Mustang 289 V8 megasquirt 3 MPI BiFuel fullseq. V8 LPG & Petrol Injection & Spark
91 Ford Sierra 1.6 OHC MS2
Your European Megasquirt source
http://www.jfetech.nl