Page 2 of 2

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Tue Nov 23, 2010 5:53 am
by pit_celica
Hi, here is my latest .msq file.

Now, the car is stored for winter. I will try to add fan control and VSS for next season.

Sam

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Tue Nov 23, 2010 8:55 am
by fortmyerspolice
pit_celica wrote:Hi, here is my latest .msq file.

Now, the car is stored for winter. I will try to add fan control and VSS for next season.

Sam

Thanks!

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Sun Aug 26, 2012 11:51 am
by jasaircraft
Very nice thread! So we could agree the triggering pattern is something like 32-2 and 1 for cam or something like that?

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Sun Aug 26, 2012 2:26 pm
by pit_celica
jasaircraft wrote:Very nice thread! So we could agree the triggering pattern is something like 32-2 and 1 for cam or something like that?
It's a 36-2 with a single tooth cam. Thanks for the nice words!

Sam

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Tue Aug 28, 2012 12:56 pm
by jasaircraft
Great! Im setting up a haltech ps1000 on a 4g 3sgte mounted on a Rav4, just finished making a custom wiring loom, I wanted to put a MS3 on this project but Im waiting for a password protection upgrade, not because of giving out copies but so that maps ad setup wont get fiddled with...

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Wed Aug 29, 2012 5:23 am
by tpsretard2
jasaircraft wrote:Great! Im setting up a haltech ps1000 on a 4g 3sgte mounted on a Rav4, just finished making a custom wiring loom, I wanted to put a MS3 on this project but Im waiting for a password protection upgrade, not because of giving out copies but so that maps ad setup wont get fiddled with...
I just did a haltech also, it seems to have very good vr inputs. but i was not a fan of it.
the car did make good power and did work well though..

Re: pitcelica's install : v3.57+MS3+MS3X

Posted: Thu Aug 30, 2012 11:33 am
by jasaircraft
Hi tpsretard! Ive seen a lot of your posts! What ecu model did you install?
Was it on a stock engine? Do you have power and torque figures?