General support questions and announcements for MS3. See also
MS3 manuals .
Moderators: jsmcortina , muythaibxr
jsmcortina
Site Admin
Posts: 39619 Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Post
by jsmcortina » Wed Mar 19, 2014 2:42 pm
jasaircraft wrote: the download link takes you to a .exe program???
Where?
James
jasaircraft
Super MS/Extra'er
Posts: 905 Joined: Mon Jul 07, 2008 5:45 pm
Post
by jasaircraft » Wed Mar 19, 2014 3:12 pm
i downloaded his post and it is an exe file?? is this happening to others?
jsmcortina
Site Admin
Posts: 39619 Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Post
by jsmcortina » Wed Mar 19, 2014 3:12 pm
jasaircraft wrote: i downloaded his post and it is an exe file?? is this happening to others?
Which post?
James
pit_celica
Master MS/Extra'er
Posts: 682 Joined: Tue Jul 18, 2006 3:12 pm
Post
by pit_celica » Wed Mar 19, 2014 3:17 pm
I think he is talking about the "Uploading.com" link I posted in my first post of this thread. I tried to download it myself and I wasn't able. It's been a long time since I've uploaded this file into this website. I think I'm gonna move the file to my dropbox using a public link.
Sam
jsmcortina
Site Admin
Posts: 39619 Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Post
by jsmcortina » Wed Mar 19, 2014 3:19 pm
Why not just attached it using "Upload attachment" ?
James
The Deviant
Helpful MS/Extra'er
Posts: 101 Joined: Thu Apr 14, 2011 8:41 am
Location: Jefferson County, Missouri, USA
Post
by The Deviant » Wed Mar 19, 2014 3:39 pm
jasaircraft wrote: the download link takes you to a .exe program???
Original link works fine for me...
Last edited by
The Deviant on Wed Mar 19, 2014 4:40 pm, edited 1 time in total.
James B.
1985 Merkur XR4Ti Rally Car
MS3 3.57+MS3X+RTCC+Knock
Ford Lima 2.3 Turbo/MSD LS2 COPs/DIYAT Hall Cam Sensor/Electromotive VR Crank Sensor
Nexus 7 Instrumentation with Shadowdash MS
pit_celica
Master MS/Extra'er
Posts: 682 Joined: Tue Jul 18, 2006 3:12 pm
Post
by pit_celica » Wed Mar 19, 2014 4:09 pm
Anyway, I updated my first post as the link is now on my dropbox. Must be easier to download this way.
Sam
TerrenceLP
Helpful MS/Extra'er
Posts: 52 Joined: Tue May 29, 2012 8:18 pm
Post
by TerrenceLP » Thu Mar 20, 2014 4:45 pm
Ok ...
Inverted the polarity and messed with it again - logs attached!
Opinions please!
TerrenceLP
Helpful MS/Extra'er
Posts: 52 Joined: Tue May 29, 2012 8:18 pm
Post
by TerrenceLP » Thu Mar 20, 2014 4:46 pm
jsmcortina wrote: TerrenceLP wrote: and from what I can read, changing polarity doesn't matter when using Closed Loop control.
Where did you read this?
The current documention has not yet been updated in line with the firmware. As mentioned in this topic, you need to be configured so more duty = more boost.
James
I stand corrected! More duty = more boost when inverting my Mac valve 35a series 3 port.
3tc power
Helpful MS/Extra'er
Posts: 143 Joined: Mon Jan 14, 2013 6:14 pm
Location: Tampa Fl
Post
by 3tc power » Mon Apr 07, 2014 11:15 am
any updates?
mazzer
MS/Extra Newbie
Posts: 2 Joined: Wed Dec 04, 2013 10:20 pm
Post
by mazzer » Thu Jul 10, 2014 2:29 am
The dropbox link no longer works. Any chance of a reupload? Thanks
pit_celica
Master MS/Extra'er
Posts: 682 Joined: Tue Jul 18, 2006 3:12 pm
Post
by pit_celica » Fri Jul 11, 2014 8:29 am
I updated the link. It should work now. Please try and let me know.
Keep in mind that these logs were done using the old way the boost control was working.
Sam
mazzer
MS/Extra Newbie
Posts: 2 Joined: Wed Dec 04, 2013 10:20 pm
Post
by mazzer » Fri Jul 11, 2014 9:50 pm
Thanks mate! Link works now.. Appreciate the speedy response!
Dylan
dave926
Helpful MS/Extra'er
Posts: 53 Joined: Thu Apr 21, 2011 12:46 pm
Location: Rhode Island
Post
by dave926 » Mon Mar 16, 2015 4:25 pm
Link dead again.......any chance some one has the zip file?
pit_celica
Master MS/Extra'er
Posts: 682 Joined: Tue Jul 18, 2006 3:12 pm
Post
by pit_celica » Mon Mar 16, 2015 6:36 pm
Sorry about that. I did a quick clean up in my Dropbox folder and this file went out. Link is now working again.
Sam
Sunneeday
Helpful MS/Extra'er
Posts: 52 Joined: Mon Apr 12, 2021 8:17 pm
Post
by Sunneeday » Tue Apr 11, 2023 7:14 pm
hello link is dead, may i ask for a new one please? thank you