EDIT: Superceded by 1.2.x
We are pleased to announce that Megasquirt-3 firmware 1.1.x is released. This follows a year of development since 1.0.0.
EDIT: Now updated to 1.1.1 (9th July 2012)
EDIT: Now updated to 1.1.2 (21st Aug 2012)
Key new features of the 1.1.x firmware:
VVT support
Improved user configuration error reporting
Improved serial protocol for more robust tuning
12 cylinder sequential support (with custom hardware)
Nissan CAS/Optispark native support
Additional wheel decoders
Improved rotary support
Improved firmware loaders
Improved reporting of configuration errors.
Powercycle required notification.
Many smaller enhancements and bugfixes
This firmware should be used for all new installs. Existing users are encouraged to upgrade.
Note that TunerStudio 2.x.x is REQUIRED.
The zip package can be downloaded from http://www.msextra.com/doc/ms3/files/re ... -1.1.2.zip
Known bugs in 1.1.0
Optispark, Nissan CAS modes broken. Resolved in 1.1.1.
Fuel only mode broken. Resolved in 1.1.2.
MS3 firmware 1.1.2 released
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
MS3 firmware 1.1.2 released
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 firmware 1.1.1 released
1.1.1 released as a bugfix release for the Nissan-CAS issue.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 firmware 1.1.2 released
1.1.2 released, main changes changes since 1.1.1
Fix tableswitching config error checking.
Add RTCC trim.
Ensure "Fuel only" does not try to set dwell or spark flags. (Was causing crash.)
Fix tableswitching config error checking.
Add RTCC trim.
Ensure "Fuel only" does not try to set dwell or spark flags. (Was causing crash.)
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".