Wiring up a 1UZ VVTi Motor - The Triggers and VVTi portion
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
There is some experimental support for this in the latest MS3 code, although it doesn't seem to be fully tested from what I've seen.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Thanks Matt, I checked the MS3 Alpha code but didn't see anything specific to this application. |
Smohekey, have you made any advances?
Smohekey, have you made any advances?
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
As per my earlier post, I'm still waiting on composite logs to be posted before I can comment any further.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
No, not yet. My 3uz build has been put on hold while I finish another build I started years before.
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Actually I posted several times about this motor and all the logs I gathered.
http://www.msextra.com/forums/viewtopic ... ti#p397738
Here's my logs.
I wired the Crank sensor to CKP, Left vvti sensor to CMP and right vvti sensor to digital frequency in2. Both vvti sensors goes through Jbperf dual VR board. I hope this datalogs is enough to create a new decoder. Let me know if any more data is needed I'll be very happy to help. Thanks all.
Regards,
Doddy
PS: I tried using 2jz vvti decoder, MS3pro reads no lost sync, but the timing is way of. and the signal is slightly different from 2jz vvti.
http://www.msextra.com/forums/viewtopic ... ti#p397738
Here's my logs.
I wired the Crank sensor to CKP, Left vvti sensor to CMP and right vvti sensor to digital frequency in2. Both vvti sensors goes through Jbperf dual VR board. I hope this datalogs is enough to create a new decoder. Let me know if any more data is needed I'll be very happy to help. Thanks all.
Regards,
Doddy
PS: I tried using 2jz vvti decoder, MS3pro reads no lost sync, but the timing is way of. and the signal is slightly different from 2jz vvti.
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Hi James,
How is it with my logs? Can you use it to make new decoder? Thanks.
Doddy
How is it with my logs? Can you use it to make new decoder? Thanks.
Doddy
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
How many degrees off?280GE 1JZ wrote:PS: I tried using 2jz vvti decoder, MS3pro reads no lost sync, but the timing is way of. and the signal is slightly different from 2jz vvti.
Please post a datalog from cranking and the matching MSQ.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
I'm also curious on progress, looks like were making some. Keep us updated
-
- Experienced MS/Extra'er
- Posts: 183
- Joined: Wed Mar 19, 2008 2:12 pm
- Location: South Africa
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Yeah Same here...
Got a VVT-i Project coming up within the next month....
Hope to have something for then;-)
Cheers
Gordon
Got a VVT-i Project coming up within the next month....
Hope to have something for then;-)
Cheers
Gordon
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Hi Guys,
My best mate is aToyota trainer and a diagnostic tech for lexus. Let me know what data you need in relation to the 3uz vvti stuff and I'll get it all for you.
I have a 3uz going into a hotrod project so if we can get this working I'll use it for sure.
Cheers
My best mate is aToyota trainer and a diagnostic tech for lexus. Let me know what data you need in relation to the 3uz vvti stuff and I'll get it all for you.
I have a 3uz going into a hotrod project so if we can get this working I'll use it for sure.
Cheers
-
- Experienced MS/Extra'er
- Posts: 183
- Joined: Wed Mar 19, 2008 2:12 pm
- Location: South Africa
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Hi All...
Has there been any updates for the UZFE VVT-I setups....
Got a Job in next week and really need assistance with this...
PLEASE HELP????
Got the MS3-Pro, setting up the Additional VR Inputs circuits required for the relevant Pickups....
Kidest Regards
Gordon.
Has there been any updates for the UZFE VVT-I setups....
Got a Job in next week and really need assistance with this...
PLEASE HELP????
Got the MS3-Pro, setting up the Additional VR Inputs circuits required for the relevant Pickups....
Kidest Regards
Gordon.
-
- Helpful MS/Extra'er
- Posts: 68
- Joined: Sat Aug 16, 2008 11:46 pm
- Location: Te Awamutu, New Zealand
- Contact:
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Hi Folks
Is there any news/progress on this install?
Regards.
Is there any news/progress on this install?
Regards.
-
- Helpful MS/Extra'er
- Posts: 68
- Joined: Sat Aug 16, 2008 11:46 pm
- Location: Te Awamutu, New Zealand
- Contact:
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Hi
I have just completed a successful install on a 3UZ-FE including VVTi.
PM me if I can help you.
I have just completed a successful install on a 3UZ-FE including VVTi.
PM me if I can help you.
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
ray190te wrote:Hi
I have just completed a successful install on a 3UZ-FE including VVTi.
PM me if I can help you.
Hi,
I'm looking to run my 3uz vvti with manual transmission How could I wired ms3pro to my set up? Is your set up have vvti running fully?
-
- MS/Extra Newbie
- Posts: 1
- Joined: Tue Aug 18, 2020 8:04 am
Re: Wiring up a 1UZ VVTi Motor - The Triggers and VVTi porti
Hi sorry for reviving a dead thread but can you send me the details for this build ray190teray190te wrote:Hi
I have just completed a successful install on a 3UZ-FE including VVTi.
PM me if I can help you.