Hello,
Using MS3 with the X card , With BMW 6cyl firing order 1-5-3-6-2-4
With the semi-seq mode, Do i wire the injectors like wasted COP ignition??
Inj A = cyl 1 , inj B = 5, inj c = 3 , inj d = 6....... etc
did it worth to use this mode?? or just use simulation??
Thanx
Semi-Seq MS3X
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Semi-Seq MS3X
Yes.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".