map sensor pins?

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

map sensor pins?

Postby maxo-tt1 » Thu Apr 17, 2014 1:35 am

hello people, i got mapdaddy 4 bar sensor. can someone tell me whats that 6 pin? or at least wanna find ground power and signal pins.

http://www.diyautotune.com/catalog/mapd ... p-117.html
User avatar
maxo-tt1
Helpful MS/Extra'er
 
Posts: 142
Joined: Wed Dec 21, 2011 1:27 pm

Re: map sensor pins?

Postby Matt Cramer » Thu Apr 17, 2014 5:47 am

Here you go.
Matt Cramer
Super MS/Extra'er
 
Posts: 13724
Joined: Thu Apr 16, 2009 8:08 pm

Re: map sensor pins?

Postby SDelong » Thu Apr 17, 2014 2:39 pm

Matt Cramer wrote:Here you go.


What if you would like to use the 2nd for baro correction? I assume the 3 pins labeled NC would be(from left to right as pictured) 1- 5v, 2 - Ground, 3 - Map out as well?
SDelong
MS/Extra Newbie
 
Posts: 4
Joined: Fri Jan 10, 2014 10:28 am

Re: map sensor pins?

Postby Matt Cramer » Fri Apr 18, 2014 6:43 am

NC means no connection.
Matt Cramer
Super MS/Extra'er
 
Posts: 13724
Joined: Thu Apr 16, 2009 8:08 pm

Re: map sensor pins?

Postby SDelong » Fri Apr 18, 2014 8:17 am

So those 3 pins literally have no purpose in any application? Mainly I am asking if the first 3 pins have any relation to the 2nd baro port and understand that NC means no connection.
SDelong
MS/Extra Newbie
 
Posts: 4
Joined: Fri Jan 10, 2014 10:28 am

Re: map sensor pins?

Postby Matt Cramer » Fri Apr 18, 2014 9:01 am

The 3 NC pins serve the purpose of providing mechanical support for the MapDaddy.
Matt Cramer
Super MS/Extra'er
 
Posts: 13724
Joined: Thu Apr 16, 2009 8:08 pm

Re: map sensor pins?

Postby SDelong » Fri Apr 18, 2014 9:04 am

Thanks for the clarification!
SDelong
MS/Extra Newbie
 
Posts: 4
Joined: Fri Jan 10, 2014 10:28 am

Re: map sensor pins?

Postby jasaircraft » Fri Dec 08, 2017 7:03 am

Matt Cramer wrote:Here you go.


Hi Matt, can you post that image or something again please?
jasaircraft
Master MS/Extra'er
 
Posts: 738
Joined: Mon Jul 07, 2008 5:45 pm

Re: map sensor pins?

Postby jsmcortina » Fri Dec 08, 2017 7:26 am

I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
jsmcortina
Site Admin
 
Posts: 33978
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK

Re: map sensor pins?

Postby jasaircraft » Sat Dec 09, 2017 7:50 pm

Thanks James
jasaircraft
Master MS/Extra'er
 
Posts: 738
Joined: Mon Jul 07, 2008 5:45 pm

Re: map sensor pins?

Postby jasaircraft » Sun Jan 07, 2018 2:56 pm

Hi im swapping sensors on a mapdaddy 4 bar map sensor, the main sensor has gone bad (signal is permanently highest vacuum) so i swapped connections to use the other one. Why could this sensor have gone bad?
jasaircraft
Master MS/Extra'er
 
Posts: 738
Joined: Mon Jul 07, 2008 5:45 pm

Re: map sensor pins?

Postby jsmcortina » Sun Jan 07, 2018 3:06 pm

Oil or water contamination most likely.

James
I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
jsmcortina
Site Admin
 
Posts: 33978
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK


Return to MS3 General Support

Who is online

Users browsing this forum: No registered users and 2 guests