The 6 medium current ouputs on 3x

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
S.Bretz
Master MS/Extra'er
Posts: 582
Joined: Fri Nov 18, 2005 9:18 pm
Location: Lutz. Fl

The 6 medium current ouputs on 3x

Post by S.Bretz »

Do the 6 medium current outputs pull low for the PWM or do they put out B+?

The VVT and nitrous sections do not state in the manual how these circuits work....trying to wire up my VVT actuator and I need to know if I have to ground the side opposite of the MS or install to a fused 12v like the fuel injectors.


PS: thanks for the future help.
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: The 6 medium current ouputs on 3x

Post by racingmini_mtl »

They provide ground. So you need a setup like the fuel injectors.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
S.Bretz
Master MS/Extra'er
Posts: 582
Joined: Fri Nov 18, 2005 9:18 pm
Location: Lutz. Fl

Re: The 6 medium current ouputs on 3x

Post by S.Bretz »

Thanks Jean....now time to grab a cold beer and get back at it.
Post Reply