Got some errors

[skj0lsvik]

Hi,
I have a few questions that would've been nice to know the answers to.

First off all, I recently swapped the fuel-pump on my car and it's gone from good to s*** ever since. Nothing but problems, read this post if you're interested: http://www.hbcosmo.com/index.php/topic, ... ml#msg5866

I've just updated TunerStudio and was going try some new things today. Then I got a few errors, look at these:



I can't understand that I've done any changes except updating the software.


Anyways, any tips would be very appreciated!

[jsmcortina]

What firmware are you on?The MSQ is for an old version.

James

[skj0lsvik]

Can't really respond to that unfortunately, it says V2.6.01 at the top of the picture... I cannot go online either

[skj0lsvik]

Oh feck, I just updated to the latest Tunerstudio, I havent loaded any new firmware onto the actual ECU ever since I bought it

[jsmcortina]

The screenshot shows a configuration error. That message is generated by the firmware, so you must have changed something in your settings to cause it.

James