Using P5 for GM MAF input
Moderators: jsmcortina, muythaibxr
Using P5 for GM MAF input
The manual says P5 can be used for GM frequency MAF input, and is suitable because it can handle the high frequencies. But it also says that if this is done, hardware changes must be made to the MS3 - but I can't find anyplace that explains what changes must be made. I can't use P4, because I'm using it for my Optispark high res output. Thanks for any help.
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Using P5 for GM MAF input
See the attached extract from the manual I'm working on.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".