Hello,
i have a MS3x V3 and want to use the Shift Cut function for my Bike as a classical Quickshifter System.
So i don't need or have a solenoid Valve.
The Problem is, that there is no choose in the drop down menue for "None" for Solenoid Output.
Is this a firmware thing or TunerStudio?
I don't want to use a output twice for a function i actually need and the solenoid output.
I guess setting the solenoid Delay to zero seconds isn't enough and may cause trouble?
regards
Shift Cut without Solenoid Output?
Moderators: jsmcortina, muythaibxr