LS3 with 58x, cam input

[nathaninwa]

Im going to be running the 58x crank and will be deleting the gm vvt for a standard setup, but default is a 4x cam gear, I dont see an igniton code for this, would I benefit from the LS2 1x cam gear and run poll level?

[jsmcortina]

Just select "Poll level" and it will work.

James

[nathaninwa]

Thanks James, I'll get the default 4x gear then. And sequential is still abailalble with that gear? Thankyou

Edit, nevermind, just went through the Pro manual and found the info I needed under the LS1 section.