ms3 progressive nitrous instal
Moderators: jsmcortina, muythaibxr
ms3 progressive nitrous instal
Hy guys I confused how install progressive nitrous in my car ,,,, my questions is I can conect direct to solenoid pin nitrous 1? ?? or use defold relays ground pin,,, how control nitrous duty setting ? Please helps
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: ms3 progressive nitrous instal
For progressive nitrous you need to use either:
- direct wiring to the solenoid if the current is low enough (perhaps use mainboard INJ1, INJ2?)
- use a DC solid-state-relay to operate the nitrous solenoids
James
- direct wiring to the solenoid if the current is low enough (perhaps use mainboard INJ1, INJ2?)
- use a DC solid-state-relay to operate the nitrous solenoids
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".