Cold Accel Multiplier
Moderators: jsmcortina, muythaibxr
-
Trump
- Experienced MS/Extra'er
- Posts: 238
- Joined: Fri Oct 15, 2010 4:41 pm
- Location: Sydney,Australia
Cold Accel Multiplier
When a value is set here, does that mean that the accel is multiplied by that amount at -40 and that this percentage tapers off to 100% at some warm value?
Triumph TR3A. MS3X, IBT, Fully Sequential Injection, Wasted spark, 60-2 crank wheel.
-
Trump
- Experienced MS/Extra'er
- Posts: 238
- Joined: Fri Oct 15, 2010 4:41 pm
- Location: Sydney,Australia
Re: Cold Accel Multiplier
No answer on this. Can some one please give me some direction on this?
Triumph TR3A. MS3X, IBT, Fully Sequential Injection, Wasted spark, 60-2 crank wheel.
-
elutionsdesign
- Super MS/Extra'er
- Posts: 1341
- Joined: Mon Sep 05, 2011 1:20 pm
Re: Cold Accel Multiplier
It would be logical that the taper followed your WUE curve. Logical, not certain.
Graduate of EFI University.
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
-
jsmcortina
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Cold Accel Multiplier
Full multiplication at the coldest temperature in the warmup table, zero multiplication at the warmest. The -40 is not actually correct.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
Trump
- Experienced MS/Extra'er
- Posts: 238
- Joined: Fri Oct 15, 2010 4:41 pm
- Location: Sydney,Australia
Re: Cold Accel Multiplier
Yes logical and what I thought but was not sure. Thanks Jim, yes I take it that the temp it is set at ,is the lowest on your WUE chart and tapers to the highest on the chart.
Triumph TR3A. MS3X, IBT, Fully Sequential Injection, Wasted spark, 60-2 crank wheel.