old firmware download. (FWD SR20)

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
maik21
Experienced MS/Extra'er
Posts: 248
Joined: Mon May 14, 2012 12:19 am

old firmware download. (FWD SR20)

Post by maik21 »

hi. i have issues trying to find firmware code.
where can i download old firmware code? i want to try older code.

came from http://www.msextra.com/downloads/ and there is no firmware list to download. only newer code available.

thankyou very much.
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:

Re: old firmware download.

Post by kjones6039 »

For..... MS1, 2, 3....?

There are actually a couple of older versions for MS2 at the link that you posted.

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
maik21
Experienced MS/Extra'er
Posts: 248
Joined: Mon May 14, 2012 12:19 am

Re: old firmware download.

Post by maik21 »

for ms3. i click on download archive but there is only one file.
Rover8
MS/Extra Newbie
Posts: 5
Joined: Sat Jun 22, 2013 5:11 am

Re: old firmware download.

Post by Rover8 »

I PMed you.
jsmcortina
Site Admin
Posts: 39615
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: old firmware download.

Post by jsmcortina »

maik21 wrote:for ms3. i click on download archive but there is only one file.
What version are you looking for and why?

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
maik21
Experienced MS/Extra'er
Posts: 248
Joined: Mon May 14, 2012 12:19 am

Re: old firmware download.

Post by maik21 »

it was for a issue i have using 1.3.4 fw with a nissan 360 cas. now i know ms3 only support for 360 rwd cas and this cas is not same as 360 fwd cas so i dont need testing old firmware.

thankyou very much for your help.
jsmcortina
Site Admin
Posts: 39615
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: old firmware download.

Post by jsmcortina »

maik21 wrote:now i know ms3 only support for 360 rwd cas and this cas is not same as 360 fwd cas
What's the difference? Please start a new topic or post a link to an existing one.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
maik21
Experienced MS/Extra'er
Posts: 248
Joined: Mon May 14, 2012 12:19 am

Re: old firmware download.

Post by maik21 »

this cas is supported by ms3 firmware.

rwd sr20det cas.

Image


and my problem is im testing ms3 with another nissan cas.

fwd sr20de cas (very common in the america.)
Image

i have a week trying to solve this problem. now i know its because cas disk is different.

this is thread.
http://www.msextra.com/forums/viewtopic ... 31&t=57866
maik21
Experienced MS/Extra'er
Posts: 248
Joined: Mon May 14, 2012 12:19 am

Re: old firmware download.

Post by maik21 »

fwd sr20de its almost same as ka24de nissan cas.
jsmcortina
Site Admin
Posts: 39615
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: old firmware download.

Post by jsmcortina »

I can look at supporting this for the 1.5 release.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
maik21
Experienced MS/Extra'er
Posts: 248
Joined: Mon May 14, 2012 12:19 am

Re: old firmware download.

Post by maik21 »

thankyou very much, james.
Post Reply