racepak haltech IQ3 connection?

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
hojje
MS/Extra Newbie
Posts: 6
Joined: Sun Mar 15, 2015 11:13 am

racepak haltech IQ3 connection?

Post by hojje »

Hi.
I've bought a haltech IQ3 dash and have a few questions that I cant find any answers to.
(I have MS3 V3.0x installed on my BMW V12 engine.)

how do i do to make this work together?
I searched for canH and canL, and the company who made my box said it would be pin 6(canH) and 11(canL), is this correct? other people said it would be pin 6 and 8?

or is there an easier way to connect a dash?
and how do I activate "canH and canL"

anyone here who has got this working?

I apologize if I miss spelled anything, we only have English in school in Sweden :-)
thanks, /Håkan
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: racepak haltech IQ3 connection?

Post by jsmcortina »

The internal CAN wiring is covered in the manual
http://www.msextra.com/doc/pdf/html/MS3 ... 3-215.html
http://www.msextra.com/doc/pdf/html/MS3 ... .3-38.html

However, the physical layer is only part the story. See also : http://www.msextra.com/forums/viewtopic ... 25&t=57055

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
hojje
MS/Extra Newbie
Posts: 6
Joined: Sun Mar 15, 2015 11:13 am

Re: racepak haltech IQ3 connection?

Post by hojje »

Thank you!
But do you know if I need the 120R terminal resistor?
And how do I activate this outport? Or is it always on?

I really appreciate all help!
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: racepak haltech IQ3 connection?

Post by jsmcortina »

The 'dash broadcast' feature is very new and the Racepak adapter has not yet been validated.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply