I had reason 11 running permanent, but no synch lose.
Everybody says that the code ignores reason 11 but just tells you that you have noise on your signal.
Now after adjusting my vr circuits and doing nothing else than that. The reason 11 was gone but the engine ran pig rich, I had to drop ve from 35 til 22 ish. at idle.
So is it really ignoring the noise or is something else going on.
Idle was also improved after getting rid of reason 11.
PS. Running 1000ccm on 2.2l engine.
reason 11.
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: reason 11.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 393
- Joined: Sat Mar 03, 2007 9:27 am
- Location: Denmark, Fyn
- Contact:
Re: reason 11.
Before change in VR Circuits.