a/c idle up question
Moderators: jsmcortina, muythaibxr
a/c idle up question
ms3 extra running 2.6.14. my a/c idle up feature was working flawlessly until yesterday. i am using the n2o in as my signal to the iac. for some reason the n2o line has 10.4v power and if the idle up feature is activated regardless of the n2o is connested to a power source my revs go way up. this line should not have power as its a "line in".hopefully someone can help thanks
Re: a/c idle up question
maybe i should ask in a different way. what would caue my nitrous in to have voltage present ?
Re: a/c idle up question
checked tableswitch in this am and it too is showing a voltage of 10.4. am i missing something?
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: a/c idle up question
Please be sure you do not have JP8 connected on the MS3X card.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: a/c idle up question
thanks for the reply Matt and it was nice meeting you at THE MITTY. we were running the porsche ms3 K3 935. ive made no wiring changes and the idle up circuit was working fine on the 930 for over a year.. i know its crazy. ron is going to check it out on the bench tomorrow.even with the big power #s im running its nice to have a/c here in the tropics!
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: a/c idle up question
Yes, I definitely remember that car! Let me know what you find.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: a/c idle up question
ok rebooted firmware and problem gone!! for now