Startup Tuning

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
PeeWee2000
MS/Extra Newbie
Posts: 1
Joined: Sat Jan 02, 2016 5:55 am

Startup Tuning

Post by PeeWee2000 »

Hi everybody,

I've been trying since the summer to get my startup tuned to no avail. I've leaned it out and enriched it but it never starts without giving it some gas. The fuel map is pretty solid it idles perfectly stoich (well.. 13.7) when it's warmed up. What settings should I focus on editing to get this tuned? I can attach a datalog but the O2 sensor doesnt kick on until after a few seconds of running so I don't know what use it will be.
elutionsdesign
Super MS/Extra'er
Posts: 1341
Joined: Mon Sep 05, 2011 1:20 pm

Re: Startup Tuning

Post by elutionsdesign »

Data log please, there is a lot more in there than just the O2 reading.
Graduate of EFI University.

I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: Startup Tuning

Post by Matt Cramer »

We've got startup tuning tips here:

http://www.diyautotune.com/tech_article ... uning.html
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply