I have a stand alone 4L80E controller. Can I use this with my MS3X? If so, can someone point me to the wiring diagram for this? I was planning on going to MegaShift but the transmission came with a standalone controller - so I am just asking.
Thanks
Josh
MS3X with Stock 4L80E controller
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 7
- Joined: Thu Dec 17, 2015 12:51 pm
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: MS3X with Stock 4L80E controller
Really no diagram to use. Wire your tranny controller per it's instructions and the 3x per it's schematic. You'll need to share tps wires and maybe crank, but you can get crank from the tranny. Since its stand alone it may not even need tps. The only major thing you'll be missing is timing retard during shifts
I use microsquirt and integrate it over canbus. Works really well
I use microsquirt and integrate it over canbus. Works really well
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control