Wired my stepper IAC per the first diagram on page 46 manual and it runs backward. Swapped 1A for 1B and 2A for 2B and it still runs backward! Lower number of steps is further open....
Thought switching the wires should reverse the movement?
Help!
GM Stepper IAC Working Backwards
Moderators: jsmcortina, muythaibxr
-
flak monkey
- Experienced MS/Extra'er
- Posts: 213
- Joined: Tue Mar 24, 2009 1:58 pm
-
jsmcortina
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: GM Stepper IAC Working Backwards
Swap just two wires.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
flak monkey
- Experienced MS/Extra'er
- Posts: 213
- Joined: Tue Mar 24, 2009 1:58 pm
Re: GM Stepper IAC Working Backwards
Thanks James - I fixed it by switching coil 1 and 2 wiring - working fine now.
-
billr
- Super MS/Extra'er
- Posts: 6828
- Joined: Sun May 15, 2011 11:41 am
- Location: Walnut Creek, Calif. USA
Re: GM Stepper IAC Working Backwards
Glad you got it fixed, of course; but you really only need to swap the wires to one coil.