On the 1.4.x firmware are boost targets absolute (kPa) or percentage of absolute barometric pressure?
If percentages, how are they calculated from MAP if there is no barometric pressure sensor?
I did have a look through the docs but couldn't find anything to clear this up either way.
Many thanks.
Boost Targets
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Boost Targets
They are absolute kPa.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Boost Targets
Many thanks James.