Tooth logger
Moderators: jsmcortina, muythaibxr
Tooth logger
Is there a issue with this?
I cant view yet. Im not sure how to data log yet
I cant view yet. Im not sure how to data log yet
Re: Tooth logger
Thats a normal datalog it records all the sensor reading the ecu is getting and also the outputs from the ecu like injector duty cycle ect. you can down load "mega log viewer" from http://www.tunerstudio.com/index.php/downloads to open and view this type of log file.
a tooth log only captures and displays the signal from crank shaft sensor. the log you posted shows the engine reving up to 4050 rpm without any issues of losing sync.
a tooth log only captures and displays the signal from crank shaft sensor. the log you posted shows the engine reving up to 4050 rpm without any issues of losing sync.
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Tooth logger
See the "Forum help page" and read the Manuals.dpetty wrote:I cant view yet. Im not sure how to data log yet
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Tooth logger
Hello Grom
I still cant view a data log? can you check this out car is missing at 5000 RPM
I still cant view a data log? can you check this out car is missing at 5000 RPM
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Tooth logger
Why not?dpetty wrote:Hello Grom
I still cant view a data log?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Tooth logger
I have a MAcBook air
When I open Megalog Viewer MS lite 4.1.10
I click on log viewer it offers no other menu?
Just grey screen that says Megalog Viewer
When I open Megalog Viewer MS lite 4.1.10
I click on log viewer it offers no other menu?
Just grey screen that says Megalog Viewer
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Tooth logger
You need to open the log file.
File > Open
James
File > Open
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Tooth logger
is there 'file' on the menu bar at the top? no sync loss, maybe you need to tweak the ve table looks like it could do with some work. listen out for pinging as you are running a lot of timing
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Super MS/Extra'er
- Posts: 6828
- Joined: Sun May 15, 2011 11:41 am
- Location: Walnut Creek, Calif. USA
Re: Tooth logger
Post the MSQ, too.
Re: Tooth logger
here is msq
There are no menues on my viewer?
I will delete the megalog viewer I have downloaded.
Then I will purchase the HD version. Hopefully I can get it going over weekend
Thanks Dave
There are no menues on my viewer?
I will delete the megalog viewer I have downloaded.
Then I will purchase the HD version. Hopefully I can get it going over weekend
Thanks Dave
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Tooth logger
Get the "lite" version working first. Start a new topic in the "MegaLogViewer" subforum and attach a screenshot so everyone can understand what you are seeing.dpetty wrote:There are no menues on my viewer?
I will delete the megalog viewer I have downloaded.
Then I will purchase the HD version. Hopefully I can get it going over weekend
MegaLogViewer is known to work just fine on Windows, Mac, Linux.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Tooth logger
Thanks James
Got it working tonight.
Got it working tonight.