ms3 pro car starts run's then stalls

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
nathans2467
MS/Extra Newbie
Posts: 2
Joined: Thu Dec 01, 2016 4:14 am

ms3 pro car starts run's then stalls

Post by nathans2467 »

have installed a ms3 pro into my car cant get it to run sounds as though timing is wrong, running full sequential and individual ing-1 coil packs with a dual vr sensor set up 36-1 crank wheel and one tooth cam wheel. on tooth logger it seems good on cranking but when I plug injectors up to give it fuel when it fires and rpm raises the tooth logger has lost sync.
billr
Super MS/Extra'er
Posts: 6828
Joined: Sun May 15, 2011 11:41 am
Location: Walnut Creek, Calif. USA

Re: ms3 pro car starts run's then stalls

Post by billr »

Try "wasted COP" for spark mode, and...
:msq:
nathans2467
MS/Extra Newbie
Posts: 2
Joined: Thu Dec 01, 2016 4:14 am

Re: ms3 pro car starts run's then stalls

Post by nathans2467 »

all good fixed it had the wrong polarity on vr sensor switch wires changed edge and all ok
Post Reply