Hi,
maybe i missed it in the PDF documentation, but is there still the matrix of which functions can be mapped to which "additional" PIN which was present in the old web based MS2-Extra manual?
I know, with MS3 things become much more flexible but a one (or two) page overview about which pin can be used for which function would come very handy.
Best regards and happy x-mas.
MS3 Extra Pin Usage chart
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 299
- Joined: Wed Oct 29, 2008 8:26 am
- Location: Frankfurt / Germany
MS3 Extra Pin Usage chart
Honda CRX B16A1 Turbo | MS3 running | pre1.5.1 beta7 Firmware | 24/1 Dual Wheel | COP ignition | 725cc ID injectors
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 Extra Pin Usage chart
There's no table of pins showing all of the possible functions because it would be very unwieldy given the number of features. However the tables in section 3 of the Hardware Manual list the function type of each pin.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Experienced MS/Extra'er
- Posts: 299
- Joined: Wed Oct 29, 2008 8:26 am
- Location: Frankfurt / Germany
Re: MS3 Extra Pin Usage chart
Hi,
i thought so, because of the awsome flexibility ;-)
Anyway thanks for the hint.
i thought so, because of the awsome flexibility ;-)
Anyway thanks for the hint.
Honda CRX B16A1 Turbo | MS3 running | pre1.5.1 beta7 Firmware | 24/1 Dual Wheel | COP ignition | 725cc ID injectors