I have ms3x (MS3 1.4.1 release) TunerStudio MS v3.0.17
I have a problem with the menu from the sequential shift cut (Bike shift). It does not work as it is described,
It always switches only once and the only (rpm to allow shifting).Can you help me by this problem. Sorry,my english is not so perfect..i´m from germany and i hope you can understand me.
Bike shift problems Help!!!
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 2
- Joined: Mon Jan 23, 2017 11:29 am
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
Re: Bike shift problems Help!!!
attach msq
-
- MS/Extra Newbie
- Posts: 2
- Joined: Mon Jan 23, 2017 11:29 am
Re: Bike shift problems Help!!!
hello
Here the msq
Here the msq
Re: Bike shift problems Help!!!
You have your spark cut time set to 0.00 msec. No spark cut time = the engine keeps putting out full power!
Temporarily shut down - back soon!
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems