Hello everybody,
I would just now if we need to provide constant power to the ecu for the memory,
I know that the power come from a 12v switch, but i don't know for the need of constant power.
Thank you
power wiring MS3
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: power wiring MS3
No!thomas r wrote:I would just now if we need to provide constant power to the ecu for the memory,
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: power wiring MS3
Only for the MS3Pro Ultimate, not for any other MS3 variant. And the Ultimate really only uses this for about 10 seconds to save any settings after shutdown.thomas r wrote:Hello everybody,
I would just now if we need to provide constant power to the ecu for the memory,
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: power wiring MS3
Ok,
Thank you guy's
Thank you guy's