Setting up TS for AEM X uego CAN inputs
Moderators: jsmcortina, muythaibxr
Setting up TS for AEM X uego CAN inputs
Trying to get some help setton my this up in TS. I've selected it in the tools menu and in the CAN/EGO menu but still no readings. What do I need to do
Thanks
Thanks
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Setting up TS for AEM X uego CAN inputs
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Setting up TS for AEM X uego CAN inputs
my bad. I thought it would be just a simple "select this and that"
Ill attach one
Ill attach one
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
Re: Setting up TS for AEM X uego CAN inputs
Hope this works
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
Re: Setting up TS for AEM X uego CAN inputs
May also be some funky settings from me trying to get it to work.
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Setting up TS for AEM X uego CAN inputs
Try setting EGO port 1 to "CAN EGO".
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Setting up TS for AEM X uego CAN inputs
Just tried that and still inop..
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
Re: Setting up TS for AEM X uego CAN inputs
I did get this sorted out. It helps if the CAN inputs are jumpered on the main board. Soldered those in and it's working now
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1