Page 1 of 1
Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 10:02 am
by ffr3247r
Trying to get some help setton my this up in TS. I've selected it in the tools menu and in the CAN/EGO menu but still no readings. What do I need to do
Thanks
Re: Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 10:27 am
by jsmcortina
Re: Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 10:46 am
by ffr3247r
my bad. I thought it would be just a simple "select this and that"
Ill attach one
Re: Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 10:53 am
by ffr3247r
Hope this works
Re: Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 11:05 am
by ffr3247r
May also be some funky settings from me trying to get it to work.
Re: Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 11:06 am
by jsmcortina
Try setting EGO port 1 to "CAN EGO".
James
Re: Setting up TS for AEM X uego CAN inputs
Posted: Tue Apr 11, 2017 1:59 pm
by ffr3247r
Just tried that and still inop..
Re: Setting up TS for AEM X uego CAN inputs
Posted: Thu Apr 13, 2017 10:16 am
by ffr3247r
I did get this sorted out. It helps if the CAN inputs are jumpered on the main board. Soldered those in and it's working now
