Knock in vs Knock Events

linzerl · Post by **linzerl** » Thu Apr 13, 2017 5:55 pm

With the internal knock module configured, MS Logging shows me a knock in value (from 0-100 depending on knock severity)...and the configuration of the knock sensor in TS defines knock count (according to the help say.. Number of knock events detected before control is started.)

Is it possible to log/understand the actual knock events that relate to the knock in value. In MLV, I start to retard my ignition when the knock in value >50..and have configured the default knock events of 2.

What's the correlation?

Thanks in advance..