I've seen it on a YouTube carguys show... Kind of a character "car sick" had a 1uz/240/ms with the part for the iacv welded up.....? Would love to get rid of this thing on the front of my intake manifold!!
But I can't find anything on this "actually" being done!?
So I turn to you for advice
Any info would be of great interest and appreciated!!
Engine is a 95 1uzfe stock, dual dizy 12 tooth crank wheel and all. Just finished building ms3/x. GREAT SUCCESS!!!
Ms3/x 1uzfe and want to get rid of iacv....
Moderators: jsmcortina, muythaibxr
Re: Ms3/x 1uzfe and want to get rid of iacv....
I have tuned and worked on a number of 1UZs on MS.... none of them had an IAC. That said DON'T get rid of it! Dyno graphs show that the motor is airflow starved when properly tuned. Use the new "Open IAC on WOT" feature in 1.5.X firmware to give the engine more air. I suspect there is a bunch of power there waiting to be tapped.
Linfert Performance/321 Motorsports
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
Re: Ms3/x 1uzfe and want to get rid of iacv....
thanks for the reply prof315.
Nice ill check that out!
really enjoying this experience so far!! hope it all comes together soon!
Nice ill check that out!
really enjoying this experience so far!! hope it all comes together soon!