My traction control reactions don't seem to be working properly.
On the data log when the traction control kicks in it makes the initial adjustment but as the slip x time increases further timing and boost adjustments don't change. According to the data log the slip x time gets to 125, which should further adjust the spark retard from the initial 7* to about 12*, but it just stays at the initial 7*, same for the boost correction.
Any ideas on why the T/C reactions don't increase with the slip x time?
Problem with Traction Control Reactions
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 125
- Joined: Sun Oct 05, 2014 5:07 pm
Re: Problem with Traction Control Reactions
bump, did you ever resolve this? I have the same issue.
1972 Plymouth 'Cuda - 5.7L Hemi w/T56 Magnum
MS3 Gold Box, TunerStudio MS/MegaLogViewerHD user
MS3 Gold Box, TunerStudio MS/MegaLogViewerHD user
Re: Problem with Traction Control Reactions
Sounds like we are having the same issues. Did you ever resolve this?
Re: Problem with Traction Control Reactions
Yes. It's like MLV is off a decimal point.
TunerStudio's Slip x Time value = datalog # x 0.1
A 125 in MLV is the same as a 12.5 in TS
Sent from my Pixel 2 XL using Tapatalk
TunerStudio's Slip x Time value = datalog # x 0.1
A 125 in MLV is the same as a 12.5 in TS
Sent from my Pixel 2 XL using Tapatalk
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Problem with Traction Control Reactions
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Problem with Traction Control Reactions
by the way: It would be helpful, when the slip_threshold is transmitted and saved into datalogs. (Especially for those people, who use adjustable slip threshold)
Same for Spark Cut and Add Fuel. This will make traction control tuning a lot easier.
Same for Spark Cut and Add Fuel. This will make traction control tuning a lot easier.